722816 New Holland CABLE

COMP Cams 7228-16 Race Street 1.290" OD Conical Springs; 1.800" Installed Height; 16 Springs
Comp Cams Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts. || More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift. || Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640" - 2.000" and . O.D.'s from 1.101" to 1.590", making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads. || The New Standard - Conical valve springs have the best frequency damping setup - damping unwanted valvetrain frequencies without wear, heat, friction or risk of interference. || Superfinished - The 7228 Conical spring features a Superfinish surface finish that increases both lift capability and durability without increasing size.