901821 New Holland CUTTING EDGE

Taramps TS 400x4 with Automatic High Level Input 400 watts RMS 4 Channels Full Range Car Audio Amplifier RCA Input Class D 2 Bridged Channels Multichannel Amplifier System
Taramp's New version of the TS 400x4 2 Ohms with high input with automatic activation || With 400 watts of power distributed across 4 channels, that can be connected to create two bridged channels, this product can be used with a wide variety of speakers, drivers and super tweeters. || Output Power @ 13.8 VDC: 2 Ohms: 400 watts RMS / 4 Ohms: 252 watts RMS. The frequency response: 18Hz ~ 30KHz (-3dB) || Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output. Thermal Protection: The amplifier will shutdown if the heatsink gets too hot. Check the installation (speakers impedance, hot places or wrong installation) || The recommended wire gauge for Positive / negative power supply cable is 11 AWG. For Output cables wire gauge is 15 AWG. For Remote Cable is 18 AWG and for protection fuse or circuit breaker is 20A

Taramps TS 400x4 with Automatic High Level Input 400 watts RMS 4 Channels Full Range Car Audio Amplifier RCA Input Class D 2 Bridged Channels Multichannel Amplifier System
Taramp's New version of the TS 400x4 2 Ohms with high input with automatic activation || With 400 watts of power distributed across 4 channels, that can be connected to create two bridged channels, this product can be used with a wide variety of speakers, drivers and super tweeters. || Output Power @ 13.8 VDC: 2 Ohms: 400 watts RMS / 4 Ohms: 252 watts RMS. The frequency response: 18Hz ~ 30KHz (-3dB) || Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output. Thermal Protection: The amplifier will shutdown if the heatsink gets too hot. Check the installation (speakers impedance, hot places or wrong installation) || The recommended wire gauge for Positive / negative power supply cable is 11 AWG. For Output cables wire gauge is 15 AWG. For Remote Cable is 18 AWG and for protection fuse or circuit breaker is 20A

Taramps TS 400x4 with Automatic High Level Input 400 watts RMS 4 Channels Full Range Car Audio Amplifier RCA Input Class D 2 Bridged Channels Multichannel Amplifier System
Taramp's New version of the TS 400x4 2 Ohms with high input with automatic activation || With 400 watts of power distributed across 4 channels, that can be connected to create two bridged channels, this product can be used with a wide variety of speakers, drivers and super tweeters. || Output Power @ 13.8 VDC: 2 Ohms: 400 watts RMS / 4 Ohms: 252 watts RMS. The frequency response: 18Hz ~ 30KHz (-3dB) || Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output. Thermal Protection: The amplifier will shutdown if the heatsink gets too hot. Check the installation (speakers impedance, hot places or wrong installation) || The recommended wire gauge for Positive / negative power supply cable is 11 AWG. For Output cables wire gauge is 15 AWG. For Remote Cable is 18 AWG and for protection fuse or circuit breaker is 20A