145013 New Holland FORK

DOPHEN 2.48-7.87” Hand-Push Pipe Welder PE PPR PB PVDF HDPE Fusion Welding Machine
Tool 【Scope of Application】The welder is suitable for PE PP PB PVDF plastic pipe hot-melt butt welding. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. || 【Stronger Welding】Upgraded high-hardness milling cutter, sharp and wear-resistant, clean and parallel cutting surfaces, and stronger welding.The use of high quality Aluminum casting alloys for lower weight without compromising strength and performance. || 【Fast Heating Speed】Thick high-quality layer paint, uniform heat conduction, rapid heating of the tube, high work efficiency. || 【Adjustable Temperature】Accurate scale temperature adjustment 0-300℃ Manual adjustment and lasting constant temperature. || 【Parameter】Welding level(Φ, mm)；Outer dia:63mm(2.48”)、75mm(2.95”)、90 mm (3.54”)、110 mm (4.33”)、125 mm (4.92”)、140 mm (5.51”)、160 mm (6.30”)、180 mm (7.09”)、200mm(7.87”)

DOPHEN 2.48-7.87” Hand-Push Pipe Welder PE PPR PB PVDF HDPE Fusion Welding Machine
Tool

INTBUYING Pipe Fusion Welder Pipe Welding Machine PP PE PB PVDF Butt Fushion Welding Machine Tube Butt Fusion Equipment Double Clamps Hand-push Type 110V 2.48-7.87”(63-200MM)
INTBUYING It is suitable for the hot-melt butt welding connection of PP PE PB PVDF plastic pipes. It is applicable to connect PP PE PB PVDF pipe materials and pipe materials, pipe materials and pipe fittings on the site. It can also be used in the workshop. || The use of high quality Aluminum casting and 45# steel allows for lower weight without compromising strength and performance. The frame is designed with high strength and low weight, and reasonable engineering mechanical design makes welding more convenient and flexible. || The heating plate adopts independent temperature control system, and the surface coating is PTEF. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. || It consists of three parts: clamping frame, heating plate and milling machine (and its basket frame). The single-side clamping structure with clamping cover makes the welding process shorter and more effective. || Materials: Aluminum alloy casting, 45# steel, Welding level(Φ, mm)Outer dia: 63mm(2.48”)、75mm(2.95”)、90 mm (3.54”)、110 mm (4.33”)、125 mm (4.92”)、140 mm (5.51”)、160 mm (6.30”)、180 mm (7.09”)、200mm(7.87”), Docking deviation: ≤0.3mm, Voltage: 110V, Heating plate Power: 2.5KW, Milling cutter Power:1.1KW, Temperature Range： 0~300°c, Time required to reach soldering temperature： <20min, Materials can be welded： PE PP PB PVDF