3001100 New Holland HOSE

Sainlogic Weather Station Wireless Indoor Outdoor, Weather Station with Rain Gauge and Wind Speed/Direction, Temperature, Humidity, Air Pressure, Weather Forecast, Moon Phase, and Alarm, Black
sainlogic 【Comprehensive Weather Monitoring】Offers real-time indoor and outdoor data, including temperature (-40°C to +60°C), humidity (10%-99%), wind direction(0-360°), wind speed (up to 112 mph), rainfall (0-9999mm), pressure (300-1100 hPa) and so on || 【5-in-1 Outdoor Sensor】This 5-in-1 outdoor sensor includes a rain gauge, solar panel, wind vane, anemometer, thermohygrometer radiation shield. With a 328-ft range for flexible placement || 【7.56 inch, Adjustable Display】Equipped with a 7.56 x 5.9-inch LCD screen with large fonts and adjustable backlighting, ensuring clear readability of temperature, humidity, and wind speed data even in low light conditions || 【Simple and Friendly Setup】Simple installation instructions allow for quick setup. Just install batteries and mount the outdoor sensor with the included bracket (batteries not included), making it hassle-free || 【Weather Companion】Ideal for gardening lovers or weather pattern researchers, this weather station helps plan outdoor activities, travel or work arrangements, making it thoughtful for daily use

AITIAO 2PCS BME280 3.3V Sensor Module Pre-Soldered High Precision Atmospheric Pressure Sensor GY-BME280-3.3 Temperature Humidity Sensor Module for Raspberry Pi and Other MicroControllers
AITIAO The BME280 is the next-generation of sensors, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. || Pre-soldered BME280 Sensor Module: Solderless! Pins already attached. Ready to plug in and go. || BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface || Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V; Pressure: 300-1100 hPa; Temperature: -40 to +85°C ; Humidity: 0-100%; Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) || BME280 3.3V Sensor Module: High resolution and low noise, with quick response times, can be used for altitude measurements, weather monitoring, or even gaming!

3PCS BME280 3.3V Atmospheric Pressure Sensor GY-BME280-3.3 Temperature Humidity Sensor Module for Arduino
AITRIP The BME280 is the next-generation of sensors, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. || Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) || Pressure: 300-1100 hPa; Temperature: -40 to +85°C ; Humidity: 0-100% || Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V || BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface