LF4300 New Holland SHEAR BOLT

AMTECH Sn96.5/Ag3/Cu0.5 (T3) water-washable lead-free solder paste (REL0) LF-4300 35g kit USA 11410K
REL0 flux classification - resin based, low activity water-washable lead-free solder paste for professional/industrial use. Clear residue. Applicable for a syringe, stencil printing, rework, BGA attachment/reballing. Halide-free (<0.05%). Compatible with enclosed print heads. Low voiding, including LGA components || Industrial viscosity - SAC305 T3/T4 Print: 155-215; Dispensing: 80-115 (Malcom @ 10 RPM/25°C (x103mPa/s)). Industrial tack value - 37g. Surface insulation resistant. No copper mirror breakthrough. Low electrochemical migration (<1 decade drop no-clean). RoHS II and REACH compliant, Tier I Military/Avionic OEM approved || Activated residue is clear and non-corrosive - can be left on board for multiple SMT assemblies (manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from the air and subsequently cause corrosion). || Syringes are intended for industrial dispensing machines and use a piston stopper instead of a plunger - do not remove the piston as it delivers the best seal to prevent contact with air. Dispensing Kit is a third party add-on, not supplied by AMTECH. A plunger is to push on the piston and not necessary snuggly fitting AMTECH syringe, a plunger can be loose. Dispensing tip gauge (size) will be within 14-23 Ga and may differ from pictured. || Genuine product made in the USA by Inventec Performance Chemicals. Distributed by AMTECH DIRECT - every original shipment will include AMTECH Soldering Profiles card.

LF4300 CNH GENUINE OEM BOLT, SHEAR
LF4300 || BOLT, SHEAR || BOLT, SHEAR || All CNH comes with 6 month warranty

AMTECH CW-SAC305-LF4300 (0.015")
Sn96.5/Ag3.0/Cu0.5 (SAC 305) is a low residue lead-free water-washable solder alloy the AMTECH way. This alloy boasts improved proprietary core formula containing innovative blend of resin and polymer dendrimer activator to provide noticeably rapid wetting and sufficient activity to solder successfully to bare copper and other hard to solder surfaces. || 3.3% AMTECH LF-4300 Spacecraft flux core || REL0 classification - Resin-based || Water washable residue is a light amber color || Genuine product made in the USA by Inventec Performance Chemicals - 100% satisfaction guaranteed. Distributed by AMTECH DIRECT - every shipment must include AMTECH Soldering Profiles card